View MGF4961B_796207.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MITSUBISHI SEMICONDUTOR
Feb./2007
MGF4961B
SUPER LOW NOISE InGaAs HEMT
DESCRIPTION
The MGF4961B super-low noise HEMT (High Electron Mobility Transistor) is designed for use in K band amplifiers.
Outline Drawing
4.00.2 (1.05) 1.90.1 (1.05)
(unit: mm)
FEATURES
Low noise figure @ f=20GHz NFmin. = 0.7dB (Typ.) High associated gain @ f=20GHz Gs = 13.5dB (Typ.)
(1.05)
C to K band low noise amplifiers
0.50.1
1.190.2 0.125 0.05
QUALITY GRADE
GG GD-31
(1.05)
APPLICATION
1.020.1
1.90.1
RECOMMENDED BIAS CONDITIONS
VDS=2V , ID=10mA
MITSUBISHI Proprietary
Not to be reproduced or disclosed without permission by Mitsubishi Electric
ORDERING INFORMATION
Tape & reel 4000pcs./reel
Keep Safety first in your circuit designs!
Mitsubishi Electric Corporation puts the maximum effort into making semiconductor products better and more reliable , but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury , fire or property damage. Remember to give due consideration to safety when making your circuit designs , with appropriate measure such as (I) placement of substitutive , auxiliary circuits , (ii) use of non-flammable material or (iii) prevention against any malfunction or mishap.
ABSOLUTE MAXIMUM RATINGS
Symbol VGDO VGSO ID PT Tch Tstg Parameter Gate to drain voltage Gate to source voltage Drain current Total power dissipation Channel temperature Storage temperature
(Ta=25C )
Ratings -4 -4 IDSS 50 125 -55 to +125
Unit V V mA mW C C
ELECTRICAL CHARACTERISTICS
Synbol V(BR)GDO IGSS IDSS VGS(off) Gs NFmin. Parameter
Gate to drain breakdown voltage Gate to source leakage current Saturated drain current Gate to source cut-off voltage Associated gain Minimum noise figure
(Ta=25C )
Test conditions MIN. IG=-10A VGS=-2V,VDS=0V VGS=0V,VDS=2V VDS=2V,ID=500A VDS=2V,ID=10mA f=20GHz -3 -15 -0.1 11.5 --
Limits TYP. ----13.5 0.70 MAX -50 60 -1.5 -0.95
4.00.2
Gate Source Drain
Unit V A mA V dB dB
MITSUBISHI
(1/4)
MITSUBISHI SEMICONDUTOR
Feb./2007
MGF4961B
SUPER LOW NOISE InGaAs HEMT
TYPICAL CHARACTERISTICS
ID vs. VDS
50 VGS=-0.1V/STEP
(Ta=25C)
ID vs. VGS
50 VDS=2V
ID(mA)
40
DRAIN CURRENT, I D (mA)
0 1 2 3
40 30
DRAIN CURRENT
30
20
20 10
10
0
0 -1.0 -0.5 0.0
Drain to Source voltage VDS(V)
Gate to Source voltage, VGS(V)
NF & Gs vs. ID
1.6 1.4 1.2 1.0 0.8 NF 0.6 0.4 0 5 10 15 20 6 4
VDS=2V f =20GHz
16 14 Gs 12 10 8
DRAIN CURRENT, ID (mA)
MITSUBISHI
(2/4)
ASSOCIATED GAIN, Gs(dB)
NOISE FIGURE , NF (dB)
MITSUBISHI SEMICONDUTOR
Feb./2007
MGF4961B
SUPER LOW NOISE InGaAs HEMT
S PARAMETERS
Freq. (GHz) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 S11 (mag) (ang) 0.991 -16.4 0.967 -32.5 0.928 -48.5 0.886 -64.5 0.835 -80.3 0.782 -98.8 0.729 -115.0 0.682 -130.4 0.637 -145.0 0.563 -155.8 0.536 -165.2 0.527 -175.0 0.520 172.8 0.509 160.4 0.474 145.5 0.459 129.1 0.449 104.5 0.445 74.9 0.473 40.8 0.534 8.1 0.597 -21.4 0.657 -44.1 0.695 -64.0 0.696 -79.4 0.686 -93.5 0.656 -105.2 S21 (mag) (ang) 4.743 162.8 4.652 146.3 4.525 129.9 4.403 113.8 4.252 98.3 4.089 81.6 3.885 66.6 3.665 52.2 3.437 39.2 3.265 28.3 3.248 17.1 3.266 5.0 3.303 -8.4 3.422 -21.6 3.542 -36.3 3.659 -52.3 3.881 -68.5 4.101 -89.4 4.063 -111.4 3.940 -134.0 3.685 -157.2 3.324 179.7 2.969 158.8 2.570 138.3 2.294 119.4 2.038 100.1
(Ta=25C,VDS=2V,ID=10mA) S12 S22 (mag) (ang) (mag) (ang)
0.015 0.028 0.041 0.052 0.059 0.065 0.068 0.067 0.066 0.063 0.051 0.043 0.047 0.047 0.044 0.052 0.058 0.062 0.059 0.052 0.050 0.046 0.058 0.065 0.082 0.095
76.9 66.2 54.8 43.4 33.1 21.3 11.7 2.6 -6.2 -15.5 -21.9 -19.3 -17.7 -15.3 -19.1 -15.0 -26.7 -44.4 -68.0 -93.8 -125.1 -155.7 169.5 148.6 128.7 118.8
0.658 0.643 0.622 0.596 0.571 0.541 0.517 0.492 0.474 0.461 0.461 0.479 0.480 0.487 0.489 0.482 0.488 0.473 0.402 0.325 0.251 0.198 0.216 0.247 0.289 0.346
-13.0 -25.8 -38.9 -51.4 -63.0 -76.5 -87.6 -98.0 -106.1 -116.0 -121.0 -128.9 -139.8 -147.7 -157.0 -167.4 -177.8 164.4 143.4 118.7 86.6 46.3 3.2 -27.3 -45.2 -56.5
NOISE PARAMETERS
Freq. (GHz) 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 opt (mag) 0.525 0.462 0.403 0.348 0.297 0.249 0.204 0.186 0.168 0.223 0.276 0.296 0.315 0.333 0.350
(VDS=2V,ID=10mA, Ta=25C) Rn NFmin (dB) 0.43 0.47 0.51 0.55 0.58 0.61 0.64 0.67 0.70 0.80 0.89 0.97 1.05 1.13 1.20
S parameter measurement: Board: r=2.6 Thickness = 0.4mm
(ang) 144.8 166.2 -174.0 -155.5 -138.3 -122.1 -106.8 -72.3 -39.5 -14.6 17.5 36.8 55.2 72.9 89.9
0.08 0.09 0.11 0.12 0.13 0.14 0.15 0.19 0.23 0.29 0.35 0.39 0.43 0.47 0.51
0.135
0.48
4-0.3TH 0.4TH Reference point 1.90 0.31 0.61
(Unit: mm)
Note) Rn is normalized by 50ohm
MITSUBISHI
(3/4)
1.1 2.5
MITSUBISHI SEMICONDUTOR
Feb./2007
MGF4961B
SUPER LOW NOISE InGaAs HEMT
Requests Regarding Safety Designs Mitsubishi Electric constantly strives to raise the level of its quality and reliability. Despite these concerted efforts, however, there will be occasions when our semiconductor products suffer breakdowns, malfunctions or other problems. In view of this reality, it is requested that every feasible precaution be taken in the pursuit of redundancy design, malfunction prevention design and other safety-related designs, to prevent breakdowns or malfunctions in our products from resulting in accidents involving people, fires, social losses or other problems, thereby upholding the highest levels of safety in the products when in use by customers. Matters of Importance when Using these Materials 1. These materials are designed as reference materials to ensure that all customers purchase Mitsubishi Electric semiconductors best suited to their specific use applications. Please be aware, however, that the technical information contained in these materials does not comprise consent for the execution or use of intellectual property rights or other rights owned by Mitsubishi Electric Corporation. 2. Mitsubishi Electric does not assume responsibility for damages resulting from the use of product data, graphs, charts, programs, algorithms or other applied circuit examples described in these materials, or for the infringement of the rights of third-party owners resulting from such use. 3. The data, graphs, charts, programs, algorithms and all other information described in these materials were current at the issue of these materials, with Mitsubishi Electric reserving the right to make any necessary updates or changes in the products or specifications in these materials without prior notice. Before purchasing Mitsubishi Electric semiconductor products, therefore, please obtain the latest available information from Mitsubishi Electric directly or an authorized dealer. 4. Every possible effort has been made to ensure that the information described in these materials is fully accurate. However, Mitsubishi Electric assumes no responsibility for damages resulting from inaccuracies occurring within these materials. 5. When using the product data, technical contents indicated on the graphs, charts, programs or algorithms described in these materials, assessments should not be limited to only the technical contents, programs and algorithm units. Rather, it is requested that ample evaluations be made of each individual system as a whole, with the customer assuming full responsibility for decisions on the propriety of application. Mitsubishi Electric does not accept responsibility for the propriety of application. 6. The products described in these materials, with the exception of special mention concerning use and reliability, have been designed and manufactured with the purpose of use in general electronic machinery. Accordingly these products have not been designed and manufactured with the purpose of application in machinery or systems that will be used under conditions that can affect human life, or in machinery or systems used in social infrastructure that demand a particularly high degree of reliability. When considering the use of the products described in these materials in transportation machinery (automobiles, trains, vessels), for objectives related to medical treatment, aerospace, nuclear power control, submarine repeaters or systems or other specialized applications, please consult with Mitsubishi Electric directly or an authorized dealer. 7. When considering use of products for purposes other than the specific applications described in these materials, please inquire at Mitsubishi Electric or an authorized dealer. 8. The prior consent of Mitsubishi Electric in writing is required for any reprinting or reproduction of these materials. 9. Please direct any inquiries regarding further details of these materials, or any other comments or matters of attention, to Mitsubishi Electric or an authorized dealer.
MITSUBISHI
(4/4)

▲Up To Search▲

Price & Availability of MGF4961B

	To Download MGF4961B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .